SDF Custom Made Surf Boards by Sam Du Feu - Made on Gower nr Swansea, South Wales

With it’s low profile, hidden volume and single to double concaves, the S1 is fast, responsive and quick turning. Designed for high performance surfing in good waves.

Features:-

• Good Rocker nose and tail
• Single to double concaves
• Super Light construction
• Plan shape -pulled in nose and tail
• FCS or glass-on fins
• Order as square, round or swallow tail

Range from 5’6″ to 6’4″

Measurement example:-

6’0″ x 18 1/4″ x 2 3/16″

6’2″ x 18 1/2″ x 2 1/4″

The S2 is designed for those of us who are a bit bigger in stature and require a bit more drive out of their shortboard.

Features:-

• Slightly fuller rail
• Good Rocker nose and tail
• Single to double concaves
• Plan Shape-running back towards tail is straighter for good drive off the rail
• Super light construction
• FCS or glass-on fins

Range from 5’6″ to 6’4″

Measurement example:-

6’0″ x 18 1/2″ x 2 1/4″

6’2″ x 18 3/4″ x 2 5/16″

The S3 – with relaxed nose entry rocker and slightly narrower in the centre, this board is very fast down the line and quick rail to rail.

Features:-

• Low nose entry rocker
• Good tail rocker
• Low to medium rails
• Plan shape- pulled in nose and tail
• Super light construction
• FCS or glass-on fins

To be ordered 1/8″ to 1/4″ narrower than normal.

Range from 5’6″ to 6’2″

Measurement example:-

6’0″ x 18 1/8″ x 2 1/4″

Designed for small – medium surf, the FLYER S3 is a great little board. The Ultimate all-rounder in a Shortboard.

Main Features:

• Flyer hip in the plan shape for good drive off the rail and release through the back half of the board
• Low entry rocker with good tail rocker
• Single to Double concaves
• Boxy rail
• Super lite construction
• FCS fin system or glass-on fins
• Square or swallow tail

Order the “flyer s3″ 1-2 inches shorter than your shortboard and 1/8 – 1/4 inch wider.

TYPICAL MEASUREMENTS

5’11 x 181/2″ -185/8″ x 2 1/4″
6’0″ x 185/8″-183/4″ x 2 1/4″
6’1″  x 183/4″-18 7/8″ x 2 1/4″
6’2″ x 18 3/4″-19″  x 2 1/4″-2 5/16″

Designed for high performance surfing in medium plus surf. When the surf feels a bit too big for 6’1″ – but you don’t quite need a semi gun, this board fills that gap.

Order 2 to 3 inches than your shortboard and 1/8″ narrower.

The SDF Step up features a healthy rocker throughout, single concave for turning and speed and a narrower tail for control and compensation for the extra length.

Typical Measurements:-

6’3″ x 18 3/8″ x 2 1/4″

6’4″ x 18 1/2″ x 2 5/16″

6’5″ x 18 5/8″ x 2 5/16″

The NSF-2 is  designed for small to medium surf- its our most refined small wave model. Low entry rocker and good tail rocker for speed and looseness. Like the Platetail the NSF-2 is wider in the centre but with less nose area. The tail is 1/2″ wider than your shortboard  with a stinger tail for extra performance. Order  1 to 2 inches shorther than your shortboard.

Typical Measurements:-

5’9″ x 18 5/8″ x 2 3/16″

5’10″ x 18 3/4″ x 2 1/4″

5’11″ x 18 7/8″ x 2 1/4″

6’0″ x 19″ x 2 1/4″

Range from 5’8″ to 6’2″

This is our” little hybrid” designed for small to medium surf- low entry rocker and good tail rocker for speed and looseness. The Platetail has a fuller plan shape and low concaves. A good reliable board that will work in all conditions.

Order 2 to 3 inches shorter than your shortboard.

The Platetail should be ordered as a round or swallow tail.

Typical Measurements:-

5’10″ x 19 1/4″ x 2 1/4″

6’0″ x 19 1/2″ x 2 5/16″

Range from 5’8″ to 6’4″

New for 2009 designed for small to medium surf. This is our round nosed Fish- a radical approach to small wave surfing. With low rocker in the front and with good tail rocker, the Pod maintains its speed through the flats and a healthy swallow tail and tri-fin set-up to provide looseness and control through the back half of the board.

Order the Pod 4-6 inches shorter than your short board. These are excellent little boards. NB: The Pod also works great as a twin fin set-up, glassed on with our new 2009 twin fin template. It’s a bit smaller than the MRTX.

5’6″ x 19 3/4″ x 2 1/4″

5’8″ x 20″ x 2 1/4″

5’10″ x 20″ x 2 3/8″

Range from 5’5″ to 6’2″

This is a great little board.

The Step Deck allows you to have a really short-board while keeping a narrow plan shape and low responsive rails.

The design of this board allows for tight turns in small to medium surf .

Order this board 2″ to 4″ shorter than your Shortboard.

Typical size: 5’10″ x 19″ x 2.5″

The Original TWIN FIN is a little speed machine due to it’s wide straight plan shape and an abundance of volume.
This board just wants to go!!!!
The bottom shape runs from single concave in the nose through to slight Vee in the tail, so the width of the board does not hinder its maneuverability.

These boards are great fun whatever your ability!!!

Typical Size:

5′ 10″ x 20.1/4″ x 2.3/4″

The jumbo is a hybrid between a minimal and a shortboard.

With plenty of volume its low entry rocker and tweaked tail.

This is a very easy board to ride.

Typical Size: 6’10″ x 20.5″ x 2.75″

Designed to make surfing easy through catching waves and turning freely.

Typical Size: 7’6″ x 21″ x 2.3/4″

A good all-rounder!

With low entry rocker for ultimate wave catching and paddling, double concaves and tail rocker for manoeuvrability. This board performs well in most conditions.

The Performer is fitted with a 10″ fin box and FCS sidebites and can be ridden 2 + 1 or as a single fin.

Typical Measurements

9’1″ x 22 1/2″ x 2 3/4″

9’2″ x 22 1/2″ x 2 3/4″

9’6″ x 22 3/4″ x 3″

This model ranges from 9′ to 10’2″

Designed for super fast competition style longboarding. The pro model is a low volume lightweight board. The Thruster set up on the narrower more flicked tail makes for quicker, looser turns.

Typical size : 9’1″ x 22″ x 2.5″

The Stylist is a touch of single fin nostalgia.
With a rolled V bottom shape, it reacts to more angled movements.
The 50/50 rail foil helps turn and cruisey lines.
The wide concaved nose for Hangin Ten!
This longboard is for 0-3FT surf.

Typical Size: 9’2″ x 23.3/4″ x 3″

This is the little brother to the Stylist.

With rolled vee and 50/50 rails- a wide concaved nose and single fin makes for easy nose riding.

This board is designed to get the most out of small waves.

Typical Size 8’2″ x 22″ x 2.75″